1. Folding the Clear Transfer Paper

If you want to place or apply a vinyl design, this trick will help you achieve that easily. Most people do this by peeling the design on the clear transfer paper and pasting it directly to the t-shirt they want to print. However, you can get old back one edge of the paper backing to make sure only the adhesive side of the design is exposed.

Doing this will ensure that the clear transfer paper gives you accurate positioning of the design as it minimizes the chances of getting stuck. If you are sure of the positioning you want to achieve, you can g ahead apply pressure on the edge of the exposed design. You can use an iron, as you usually get the job done. You will notice that as you press it down, the clear transfer paper peels from the backing smoothly, making the application process very easy.

2. Re-Using The Transfer Tape

You can tell us your transfer tape as many times as you want. You can even use your clear transfer paper about four times. So, the next time you pull out a design from your clear transfer paper, do not throw it away. It may help you in the next project.

3. Snipping The Transfer Tape When Applying To Curved Surfaces

When using clear transfer paper on surfaces such as cups or mugs, it is best if you snip the transfer tape to make your work look neat and simple during the whole process. It also applies when taking a design from a flat surface to a curved surface. If you fail to follow the procedure, there is a high chance that it may cause the wrinkling of the vinyl design.

To avoid this, you can use a pair of scissors to clip through the transfer tape while you avoid clipping the vinyl to prevent the occurrence of folds and air bubbles. In addition, if you snip through the transfer tape between the vinyl, it will make it easier for you to curve the design on the curved surface.